News from AESwave.com
Automotive Electronics Services, Inc.
2004 Oct

AES gets help!
Ken Friedman

A long time mentor and friend, I am proud to announce that Ken Friedman has joined the AES team. Ken will be a great asset to AES and our customers. With his help AES will be able to take our services to the next level. His experience and understanding of our industry is second to none.

Ken, thank you for being a friend. Thank you for joining us!

Jorge Menchu

About Ken Friedman

Ken Friedman, Technical Service Engineer, has been with Champion Spark Plug, now Federal Mogul for over 40 years. He has been in the automotive business for over 48 years.

In the past, he has been involved with racing and engine diagnostics. Ken sold, demonstrated and trained technicians on automotive scopes back in the sixties when shops were just beginning to use this type of equipment.

With Champion's Technical Service Department, Ken has been actively involved in training, field testing of new products and special application surveys. Ken is ASE certified in Advanced Engine Performance Specialist. He is also ASE certified in Engine Repair, Engine Performance and Electrical Systems. In addition, Ken is Ford factory trained and certified in Electronics and Ford's EEC-4 & EEC-5 Systems. Ken was recognized in 1995 by Motor Service magazine as one of the top ten technical trainers in the United States. He is also a member of the Society of Automotive Engineers.

Ken was last conducting technical clinics dealing with products, engine controls and automotive electronics for NAPA customers in the Western United States.

     Ken Friedman
     AES Sales and Training Manager
     Phone:   (916) 729-5580
     E-mail:   kenvf@msn.com

Unique Feature!
SmartSpec Driveability Diagnostics CD

The SmartSpec is a PDF-based information source for 1990 through 2001 Ford, GM, and Chrysler domestic vehicles.  Most vehicle information sets in SmartSpec include 2 diagrams: Ignition System and Fuel Pump.    What's so unique about this?  

The Fuel Pump diagrams are highlighted to indicate where you can connect to the circuit for checking current.  Connect to any point on the highlighted circuit to run your current test.

In addition to the highlighted circuit, each wiring diagram will show:
• All the components of the whole system along with pinouts and wire colors
• Ground locations
• Splice locations
• Various tips are also included below each diagram (not shown above)

Other Features of the SmartSpec
• Ignition specifications
• Wiring Diagrams
• Scan Data
• Codes
• Pin Point test tips

System Requirements for SmartSpec
Windows 98 or greater PC, or Macintosh with system 9.1 or higher. Adobe Acrobat Reader is provided with the software.

AES Special Offer: 2002 Update
The 2002 update for Smart Spec will be available for free with your purchase of Ferret SmartSpec from AES!

Click here to purchase and for more information on SmartSpec.

Contact AES
Automotive Electronics Services, Inc.
3849 N Fine Ave #102
Fresno CA 93727
559-292-7851
carlos@aeswave.com

Unsubscribe to this newsletter
Scroll to the bottom of this message and click on the link titled: "Click here to change or remove your subscription''.  

Subscribe to this Newsletter

New Product SmartSpec Driveability Diagnostics CD
	Covers 1990-2001 Ford, GM, and Chrysler domestic vehicles with free 2002 update when available. Real-world specs + wiring diagrams with highlighted circuits indicated for current ramping.
Gas Cap Adapter Update set 2000-2003 for FPT25-00 and FPT25-00E
	Get the latest update for the Red Cap.

Used Equipment Click here for details
Special AES Wave! Information Management System
	Save screens from various lab scopes onto your PC. Regular: $229.00 Your Price: $160.30

Training Update for: 

PWR Training
Mark, John and Bob are on the road again fresh from the iATN convention, they headed up the west coast and then down to Texas:

Top 10 OBD-II Codes
• Oct 4th 5th Mountain View CA
• Oct 11th 12th Portland OR
• Oct 13th 14th N Bremerton WA
• Oct 16th Bellingham WA
• Nov 29th 30th Dallas TX
• Dec 1st 2nd Fort Worth TX
• Dec 6th 7th San Antonio TX
• Dec 8th 9th Houston TX

OBDII Mastering The Beast:
• Oct 6th 7th Sacramento CA

If you would like to attend or sponsor a PWR seminar please contact Bob Pattengale at bob@pwrtraining.com or call: 520-240-6292.

Training Update for: 

Tom Roberts
Tom has teamed up with NATA to present 4 lab scope seminars in Portland, Oregon

Nerd II on October 11th and 12th
Nerd III on November 8th and 9th
Nerd IV on December 6th and 7th

To sign up, please contact:
Northwest Automotive Trades Association (NATA)
V:503-253-9898 
E: info@aboutnata.org
S: http://aboutnata.org/

Training Update for: 

Craig Van Batenburg
Craig has teamed up with ASC California to present a series of classes around the state of California.

Hybrid Technology…
You will learn what you need to get started servicing these four new hybrid cars and SUV's. The new Ford Escape Hybrid is included.

Host Chapter 24, San Diego Area
September 27-28 from 6:00 to 10:00 both nights.
For More Info Call Stuart Terry at (619) 287-4215

Host Chapter 48, Orange County Area
September 29-30, 2004 from 6:00 to 10:00 both nights.
For More Info Call Ken Fox at (714) 525-3239

Host Chapter 1940, Torrance Area 
October 2, 2004 from 8:00 AM to 5:00 PM
For More Info Call Mike Walsh at (310) 325-2844

Host Chapter 11, San Fernando Valley Area
October 4-5, 2004 from 6:30 to 10:30 both nights.
For More Info Call Frank Joel at (818) 999-0210

Host Chapter 26 Tulare/Visalia Area
October 6-7, 2004 from 6:00 to 10:00 both nights
For More Info Call John Camara at (559) 688-5721

Host Chapter 42, San Jose Area
October 11-12, 2004 from 6:00 to 10:00 both nights.
For More Info Call Larry Moore at (650) 968-5202

Host Chapter 20, Mt. Diablo Area
October 13-14, 2004 6:00 to 10:00 PM
For More Info Call Chris Cook at (925) 838-0991

Host Chapter 16, East Bay Area
October 16, 2004
For More Info Call Larry Nobriga at (510) 351-8961

Find more equipment at Universal Tools

Click here to visit Universal Tools

Visit the AES store: