There are two simple methods for saving PicoScope screens into your  AES Wave! database.  

The Pico method:
1. Display the Pico screen you would like to save.
2. Select EDIT / COPY AS GRAPH from the menu.
3. Open the AES Wave! and select EDIT / PASTE.
This method will give you the waveform, cursors and grid at 1/4 scale of the original screen, approx 400 pixles wide by 240 high.

The Clipboard method:
1. Display the screen you would like to save.
2. Press the PRINT SCREEN button on the keyboard (aka F13)
3. Open the AES Wave! and select EDIT / PASTE
This method will give you an exact replica of your PC screen as it displays the Pico Scope including the settings, toolbar, etc.

The image below shows the two images captured with the Pico and the Clipboard Method after they have been pasted into the AES Wave!

Click here to view full-scale image.

AES sells an assortment of COP adapters for secondary testing on a variety of systems...

Chrysler	Ford		Honda/Isuzu/BMW
Volvo		VW/Audi

These adapters can be used with any scope provided you have the correct test lead.  In this case you will need a test lead that satisfies two criteria:

1. It will connect to the male spade on each adapter.
2. It provides the correct attenuation.  Typically 1000:1.

AES can provide you with this test lead.

For scopes with banana plug inputs (Peception, LS-2000, ADL-7100, Mac Scopes) use with the AES# 01-16-BP.

For analog or digital scopes with BNC inputs (Fluke, Interro, Genisys, Tektronix, Hitachi) use with the AES# 01-16-BNC.

An alternative to testing secondary on a COP vehicle is the Primary.  

As Mac Vandenbrink says, "Why bother with secondary when the primary burn line will show you all the information you need about the spark/combustion event?" See for yourself...