Limited availability

Call 559-292-7851 or email: carlos@aeswave.com

Features for Fluke 98

Specifications for Fluke 98

Contents

Optional Accessories

[ Home | the New Store! ]
[  Wave! Central | News & Info | Contact AES ]

Go to Fluke at AES

Features for the Fluke 98 ScopeMeter®

The Fluke Automotive ScopeMeter is a graphing multimeter, a Deluxe featured DMM and dual-channel lab scope.

Use it for IGNITION (primary, secondary, DIS) (STARTER Kit requires Optional Ignition Kit Required)
Use it for SENSOR testing (O2, MAF, MAP, ABS and more);
Use it for FUEL INJECTION (TBI, PFI, MPFI);
Use it for RELATIVE COMPRESSION and,
Use it for recording GLITCHES while in the shop or on a road test.
Use it with minimal buttons, minimal fuss, and MAXIMUM power!

• Display
Backlit screen with BIG fonts makes waveforms and menus easy to read! This is the brightest screen available.  Same for Deluxe and Starter kits.

• Automated Sensor Tests
Select the signal you wish you to see with the keypad and menu system and the F-98-2 sets itself up. The scope also includes tests for ignition, sensor/actuator, charging, battery test, voltage drop, and general tests such as scope and multimeter functions.  Same for Deluxe and Starter kits.

• General Sensors Setting
The F-98-2 does not care which make or model it is connected to.  If the sensor test is not listed in the AUTOMATED SENSOR Test List, then the General Sensors setting it will figure out what the signal type is and display it with both a waveform and the 4 relevant numeric parameters on one screen (Frequency, Duty Cycle, Pulse Width, and Peak to Peak).   Same for Deluxe and Starter kits.

• Dual Oxygen Sensor Test
Look at pre and post catalytic converter signals at the same time! Test lead kit includes two oxygen sensor filters.  Same for Deluxe and Starter kits.

• Graphing Multimeter
Min/Max Trendplot to find dropouts in signals. Records glitches as brief as 40 billionths of a second on any digital signal.  Same for Deluxe and Starter kits.

• Continuous Autoset
Tracks a signal continuously and automatically, even across changing RPM or road speeds.  The F-98-2 will find the signal even when your test situation falls outside preconfigured test set-ups.  Same for Deluxe and Starter kits.

• Engine Analyzer Functions
Not only does the 98 make measurements and display waveforms, it performs many automated tests. The kind of tests that have previously been available only on large console-type engine analyzers such as, Battery Condition, Charging, Cranking, Relative Compression, just to name a few. Same for Deluxe and Starter kits.

• Applications
Works on 1,2,3,4,5,6,8 cylinder cars, 2 or 4 stroke, diesel and gasoline engines, DIS, conventional and coil-on-plug systems, and 6, 12 or 24V electrical systems.  Same for Deluxe and Starter kits.

• Test Lead Kit for Deluxe Kit
Includes 2-oxygen sensor filters, HEI adapters for GM, Toyota and Denso, secondary ignition capacitive pickup and #1 Cylinder inductive Pickup. Most complete test lead kit for any scope. 
NOTE: the Starter Kit does not include the HEI Adapters, the secondary ignition capacitive pickup, nor the #1 Cylinder inductive Pickup.

• Recording Waveforms -- 4 different ways to find glitches:    Same for Deluxe and Starter kits.
(1) PLOT READINGS -- takes up to 4 parameters of the signal and plots them over time
(2) MIN/MAX TRENDPLOT -- records glitches as brief as 40 billionths of a second on any digital signal
(3) FLIGHT RECORD -- captures the last 40 screen snapshots in memory
(4) INTERMITTENT RECORD -- Record from 6 seconds to 21 hours with endless recorder!

• Excellent warranty: 3 years parts and labor!   Same for Deluxe and Starter kits.

Now you can capture datapoints from your Fluke 98 to your PC!! 
Check out the AES '98 Screen Capture Utility. It works with both the Deluxe and Starter kits.

Back to Top     Go to Fluke at AES

Power:
-- Internal NiCad Battery Pack; 4 hours typical operating time; 16 hours typical recharge time. (included with NEW and REFURB units)
-- AC Adapter/Battery Charger (included both the Deluxe and Starter kits.)
-- 4 alkaline C cells (not included)
-- 12 VDC, 24 VDC Cigarette lighter adapter (see Accessories below)

Oscilloscope:
2 channel oscilloscope, autoranging, cursors with time and volt readings, 40 nanosecond glitch detection, single shot capabilities, auto trigger.

Record Capabilities
Flight Recorder; up to 128 screens single channel (64 screens continuously on two channels). Plot Readings; up to 4 multimeter/engine test readings plotted over time simultaneously. Min/Max Trendplot of multimeter readings give minimum, maximum and average values measured over time. 40 screens of information in Screen Record

Memory Capabilities
128 screens for Flight record (snap shots), 15 additional internal memories for personal pre-defined setup and screen configuration (also accessible through communication interface) 

Storage Temperature:
-4°F to 158°F (-20°C to 70°C)

Size with Holster:
10.8" x 5.5" x 2.5"
(275mm x 140mm x 65 mm)

Display:
4.7" diagonal LCD (84 x 84 mm) 240 x 240 pixels with bright white backlighting

Weight with Holster:
4.0 lbs (1.8 kg)

Fluke 98-2 ScopeMeter® English/Spanish
ScopeMeter® protective holster
Hardcase with pouches for accessories
NiCad Battery Pack
AC Power Adapter/Battery Charger
Automotive Test Lead Set, includes the following
-- 3 @ 2 mm Breakout Box Adapters (Red, Grey, Black)
-- 3 @ 4 mm Breakout Box Adapters (Red, Grey, Black)
-- 3 @ Flexible Backprobe Pins (Red, Grey, Black)
-- 3 @ Wide Jaw Alligator Clips (Red, Grey, Black)
-- 2 @ 5-foot deluxe heat-resistant/shielded leads
-- 2 @ Oxygen Sensor Filter Adapters (Blue)
Miscellaneous Ground Leads + Extensions
Secondary Ignition Capacitive Pickup
#1 Cylinder inductive Pickup
HEI Adapter for GM vehicles
HEI Adapter for Toyota vehicles
HEI Adapter for Nippon Denso vehicles
Signal Demonstration Board with 9-volt battery
Illustrated User's Manual
60-minute training video
3-year warranty on scope
1-year warranty on accessories