 |
|
|
|
|
|
|
|
 PC Based 8 Channel Oscilloscope/Meter/Function Generator
+/- 10 or +/- 200 Volt Range on all Eight Channels (Built in 20X Dividers!)
> 10 Mega Ohm Input Impedance on all Eight Channels for +/- 10V Range
> 1 Mega Ohm Input Impedance on all Eight Channels for +/- 200V Range
12 Bit (0.024%) Resolution on all Eight Channels
Large 1024x768 Pixel (XGA) Viewing Area with Large Colored Traces
Data Can be Saved to Text File for Future Retrieval
Data Can be Saved to JPEG Image for E-mailing or Documentation
Web Enabled for Remote Monitoring on LAN or Internet
8 Channel Dual Time Base Oscilloscope
Click here to view screen shot.
All Channels in Full Color with Masking to assist troubleshooting
Dual Time Bases, Both Viewable Simultaneously on Separate Charts
Each Channel can be Turned On or Off on Either Chart while Running or Holding
Hold Buttons Allow Viewing of Last Five Screen Sweeps
8 Channel Stacked Oscilloscope
Click here to view screen shot.
Stacks Dual A Oscilloscope Data with Independent Ranges for Each Channel
All Channels in Full Color with Masking to assist troubleshooting
Hold Buttons Allow Viewing of Last Five Screen Sweeps
Measure and Deep Record
Click here to view screen shot
Use cursors to easily measure voltage, voltage difference, period (s), and frequency (Hz)
Easily Zoom Window, Zoom In, Zoom Out, Zoom All (extents) with mouse
Easily Pan using mouse
Data to be measured can come from Plot A, Plot B, or Deep Record
Deep Record allows continuous recording of 250,000 samples of data on all eight channels
After 250,000 sample buffer has been filled recording will continue erasing start of buffer only so the last 250,000 samples are always available for viewing and saving to file
8 Voltage Meters
Click here to view screen shot.
Eight Digital Readouts
Eight Slide Bar Readouts in Vivid Color
Independent Slide Bar Range Adjustments for Each Channel
Two Channel Timing Generator & Counter
Click here to view screen shot.
One TTL Output with Frequency and Duty Control
One Pull Down Circuit with Frequency and Duty Control. Can Control High Current Devices like Fuel Injectors, EGR Solenoids, Canister Purge Solenoids, etc.
Two Counter Inputs that can Measure Frequency, Period, Pulse Width, and Number of Pulses
Chart Graphing for Count History
Two Channel Function Generator
Click here to view screen shot.
-10 to +10 Volts DC output
Automotive Sensor Simulator Intercepts Sensor Signal on Meter and Sends Modified Signal to PCM
Slow Frequency Waveform Generation: Sin, Triangle, Square, and Sawtooth (Ramp)
Contents of the Escope
Deluxe Case with Multiple Below Accessories
EScope Interface Box
PCMCIA Computer Card and Cable to Interface Box
EScope Software and Driver Software for PCMCIA Card
High Current Amp Clamp (600A Max)
Low Current Amp Clamp (60A Max)
9 12ft Color Coded Cable Extensions
9 ft Battery Ground Cable
8 Color Coded Back Probes with Banana Jacks
2 Banana Plug Adapters
12 Color Coded Alligator Clips with Banana Jacks
2 Test Probes with Banana Jacks (One Black, One Red)
10 Color Coded 6ft BNC Banana to Plug Leads
8 Color Coded T Wire Piercers
AC Coupler
12V DC Power Supply (Battery Clips)
Power Supply to Cigarette lighter
Power Cord
USB Cable
Bracket Set for Laptop
2 Extra EScope Fuses
Hard Plastic Case with Foam Padding for Accessory Kit
Minimum PC Requirements
1024x768 Pixel Resolution Screen
2 GHz Processor Speed (faster is better)
Available PCMCIA Slot
Windows XP or 2000 or Vista
512 MB RAM (more is better)
500 MB Available Hard Disk Space
USB 2.0 Hi-Speed Port
Watch a Video
Below are streaming video files that give an overview of the Escope and Eignition tools and show real examples of how to use them to quickly solve problems on automobiles. The videos are the same as the demo DVD only with less resolution to allow viewing with internet connections as slow as 46k.
The videos require Windows Media Player (click HERE to download). Your Windows Media Player should open and begin to play the video when you click one of the links below:
DSL or Cable: 282 kbps Video.
Dialup: 46 kbps Video.
|
|
|
|
|
|
