|
x431 Updates and
Renewals
2011 Q1 Software Updates
GM
- OnStar Configuration/Automated Module Search & ID
- HEGO Relearn
- Setup SDM to BCM Handshake & IPC
- lnjector Balance TestJlSU Programming
- TPMS Relearn
- Steering Angle Reset
- Yaw Angle Reset
- Idle Relearn
- Transmission Adaptation Reset
- BPP Calibration.
CHRYSLER
- Access ORC
- Enable & Disable 0CM
- ABS Automated Brake Bleed
- Relearn Cam & Crank Sensor
- Service Interval Resets
- Program TPMS
FORD
- IVD Initialization
- Fast Test function for all F-series
- Cylinder Contribution Test with graphing
- DPF Reset & Regeneration
- Injector Programming
- KAM Reset
- RESC & RCM Configuration.
VW/Audi
- Channel ID & Measuring Block Information added
- Access to Lane Departure and Park Assist Systems
- Self-Leveling Suspension.
BMW/Mini
- Access to ROPS/Reset Oil Change Interval
- Valvetronic Limit Position Relearn
- Consumption Indicator Relearn Adjustment
- Diesel Particulate Filter Regeneration
- EGS Mechatronics Adjustment.
RANGE ROVER
- DPF Regeneration
- EAS Suspension Height Recalibration
- Injector Replacement
- Yaw & Roll Rate Sensor Recalibration
VOLVO
- 1CM Programming
- SRL & SRI Resets
- PBM Calibration & Activation
- DIM Programming
- TCM Calibration and Reset of Gearbox after oil change.
HONDA
- Access to 2nd Gen Theft Deterrent System for Key Matching
- ECM
- PCM
- MPCS
- MICU
- IMOES Recoding!
- OPDS Initialization
TOYOTA/LEXUS
- Access to LFA Engine I & II added
- Access to EMPS for setting steering to zero point
- Fuel Leak Test
2011 Q2 Software Updates
GM:
BCM Setup and Automated Bleeding, APP, BPP, H02S, & Crank Shaft
Position Variation Relearns, IAC & Steering Angle Reset, Air Bag to
SDM Configuration, Immobilizer & Key FOB Programming, Along With VCIM
Set Up
Chrysler: TPM Trigger Module Test, Injector Quantity Adjustment &
Duty Cycle View/Reset, Actuation tests for WCM, DMFR, & ABS, As Well
As PCM Crank/Cam Relearn
Ford: Cylinder Contribution Test, ABS Brake Bleeding, Anti-Theft
& Airbag Configuration
2011 Q1 Software Updates
Massive OE-Level Upgrades to FORD, GM & Chrysler Software!
Factory Cylinder Contribution Test, SDM S/N & ABS Brake Bleeding
for Ford
OE-level capability on late model CAN Chrysler vehicles, including
adaptive resets, relearns & more BCM actuations!
More modules added for GM, including BCM, SRS, HVAC, IPC, & added
functions such as Oil Service Reset, Speed Control adjustment setting,
Steering angle resets, Yaw Rate Recalibration, HO2S Heater Relearn,
SDM to BCM Set-Up, Crankshaft Variation Relearn, ABS Brake Bleed, Fuel
Trim Resets & more
Throttle Body Relearns on Volvo, VW, Audi, Honda and Nissan!
Perform Steering Angle Resets on Toyota, Volvo, VW, Audi & more!
Improved Module Coding on VW, Audi, BMW, and Land Rover (Now including
Remote Key Programming for Freelander and more Adaptive Resets for Range
Rover and Land Rover models)
Added immobilizer functions for Ford, Honda, and Nissan!
Improved Relearns on Nissan, including self learning function on NATS
Immobilizer system!
And then there is Volvo
Launch has released their 40th major release for Volvo. Launch has
been writing software for OE Level Volvo coverage going back to 2002 and
includes:
- full read/clear of fault codes in all subsystems
- view/graph and record real-time live data
- support of factory adaptations
- sensor calibration
- service resets
- full component activation & bi-directional controls
- recoding of replacement modules.
Launch Scan Tools cover the following Volvo models: S40, S60, S70, S80,
S90, V40, V50, V70, V90, C30, C70, XC60 and 90, along with 850 and 960
models--more models than readily available in North America and more
coverage than any single scan tool in North America.
|
Subscription
Renewal!
1-year
Subscription
renewal for all x431 models: Tool, Infinite, Master, Diagun (full) and
standard x431.

|