Categories
Shop by Price
Vendors
Join our Newsletter
Subtotal: $0.00
Blog Tags

> Flash Programming > 100A Flash Programmer / Power Supply with Battery Charger

 
Detachable cables
103A on a 2015 BMW X5

100A Flash Programmer / Power Supply with Battery Charger

AES#:
SCH-100a
MSRP:
$999.00
Price:
$699.00
Your Savings:
$300.00 (30.03%)
Qty:
 
California Residents: Proposition 65 Warning
 
 
 
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)

If voltage levels drop during a flash, you may have to start again and/or module(s) may get damaged. Use the The Schumacher 100A Flash Programmer during each flash session to prevent power-related problems.  It outputs a designated supply of clean and steady DC power to keep the vehicle at specific voltage and amperage levels as specified by the OE.

The Schumacher 100A Flash Programmer can deliver 70A charging current continuously and deliver up to 100A for three minutes. It runs on 110 AC and includes a 9-ft power cable.  The battery cables are 10-feet long and are detachable and easily replaceable. (Longer cables are available 13-ft and 16-ft.)

• Support 12V batteries and rated capacities of 12 Ah to 111 Ah.
• Fully automatic battery charger for regular automotive, lead-acid, calcium, AGM, start-stop and Gel Cell batteries.
• Maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work.
• Flash Programming voltage can be set between 13.0-14.8V with a continuous voltage of 70A and up to 100A for 3 minutes.
• Service Mode charges the battery at 13.5V, automatically adjusting amperage from 0-70A based on battery demand.
• Boost mode charges the battery at 14.4V, automatically adjusting amperage from 0-70A based on battery demand.
• Built-in voltmeter indicates voltage at the load/battery terminals
• Built-in ammeter indicates the amount of current that is being drawn by the load/battery (+/- 2 Amps)
• Heavy-duty clamps with replaceable jaws.
• Quick attach and detach 10-ft battery cables (13-ft and 16-ft available via special order)
• Adjustable mounting brackets for permanent installation to most shop vehicle lifts.
• Dual temperature-controlled cooling fans.

Specifications (from the User Manual) 
Input: 120 V~60Hz 15A continuous; 24A intermittent
Output: Reprogramming Mode: 13-14.8V DC / 0-70A continuous or 100A for three minutes
Output: Service Mode 13.5 DC / 0-70A
Output: Boost Mode 14.4V DC / 0-70A
Weight: 10.5 pounds (4.75 kg)
Operating temperature: -20 °C – +40 °C (-4 °F–+104 °F) 
Operating humidity: 0 – 90% RH non-condensing 
Working life (MTBF): 85,000 hours 

Contents
- Base Unit w/digital display
- 10-ft Battery Cables
- 9-ft AC Power Cord
-  Mounting hardware
-  Manual
-  1-year warranty

Supporting our community

Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave IAP