Shop by Price
Join our Newsletter
Subtotal: $0.00

> Scan Tools > AutoEnginuity Generic w/CAN


AutoEnginuity Generic w/CAN

California Residents: Proposition 65 Warning
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)
More Info

The AutoEnginuity Scan Tool is a professional Windows PC diagnostics scan tool for all OBDII (OBD2) and EOBD IV+ compliant vehicles.

It allows you to read the vehicle's diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), actuate bi-directional controls, reset adaptations, and view inspection/maintenance system test results to quickly determine what service the vehicle requires.

The hardware is USB 2.0 compliant and requires no device drivers. The software is available in English, Spanish, and German.

The AutoEnginuity Scan Tool supports all OBD-II Modes:

Mode 1 Live Parameter Data
- View live vehicle sensors in a meter, graph, or grid format
- Unlimited logging of live vehicle sensors in TXT, XML, or CSV (1ms logging accuracy)
- Playback your data logs for offline analysis
- Display English or Metric (SI) units of measure supported
- Configure your sensors' ranges, scaling value, audible alert triggers, units, and sampling rate
- Support for the new extended sensor list (233 sensors--supporting the SAE J1979 May 2007 additions)
- Record feature enables datalogging for export and playback

Mode 2 Freeze Frame
- Read and clear Freeze Frame data

Mode 3 - 7 Diagnostic Trouble Code Retrieval
- View generic and manufacturer enhanced data on the same tool
- Save, print, read and clear Stored and Pending P, U, B, and C Trouble Codes. Supporting P0 - P9 generic and manufacturer specific codes (including the lettered codes (e.g., P06A0)
- Large manufacturer specific trouble code library (30,000+)
- Scan vehicle for diagnostic trouble code changes in five minute intervals.

Mode 4 Clear / Reset Emission-Related Information
- Clear the Check Engine or Service Engine Soon indicator
- Reset status of system monitoring tests

Mode 5 O2 Sensor Monitoring Test Results
- View O2 sensor test results and zoom to "known good" presets
- Wide-band O2 sensor support
- Clear oxygen sensor test data
- Resets fuel trim stored values
- View oxygen sensor live data and test results

Mode 6 OnBoard Monitoring Test Results
- Fully translates Mode 6 data with test results scaled per the manufacturer's own specifications. If a system test fails, now you can see the results from the failing component; not just the system- Run and query specific component and system tests. Support for generic and enhanced bi-directional tests
- View all 11 Inspection/Maintenance systems and Mode 6 data
- Automatically scans for changes in continuous and non-continuous onboard system test results in five minute intervals
- Save all IM and Mode 6 information or DTC and IM information into a report for offline review and/or printing

Mode 8 Request Control of OnBoard System / Components
Bi-directional support. You have the ability to initiate system and component tests

Mode 9 VIN reporting / CAL / CVN / In-Performance Tracking
- Full ECM information including CAL, CVN, and VIN reporting
- Displays the ECM ID, Calibration ID of the ECM, Calibration Verification ID of the ECM from all reporting ECMs.
- In-Performance Tracking monitors the number of times a component test encounters conditions suitable to run and complete

What the AutoEnginuity ScanTool provides:
*Support SAE interfaces: J1850 (PWM and VPM), ISO-9141-2, ISO-14230 [KWP2000], and CAN [11bit and 29bit]
*Support for CAN and even the CAN 6x Mode3
* Unlimited logging of live vehicle sensors in XML or CSV (1ms logging accuracy).
* Savable configurations. Configure sensors' ranges, scaling value, audible alert triggers, units, and sampling rate.
* Run and query specific component and system tests
* English, German, and Spanish versions

PC and Tablet requirements
- Windows® full versions for: XP / Vista / Windows® 7 / 8.0 / 8.1 / 10
- 200 MB of free drive space
- 100 MB of memory
- 1 USB Port

Contents of AutoEnginuity PC (USB) Scan Tool Package
* AutoEnginuity's software
* AutoEnginuity's OBD-II vehicle interface
* USB 2.0 interface cable
* User Guide
* Quick Installation Guide


Read Stored and Pending Diagnostic Trouble Codes and clear the Check Engine or Service Engine Soon indicator

In addition to reading stored and pending DTCs on this screen you can also:
* Read and clear Freeze Frame data.
* Clear the Check Engine or Service Engine Soon indicator.





See multiple sensors in a digital meter-like format





Large color-coded digital meters for quick and easy viewing from across the shop




See sensor dependencies or watch for a pattern through the plotted data




View Mode 6 data and all 11 Inspection/Maintenance systems





View oxygen sensor live data and test results.




Vehicle Information VIN ID




Configure Sensors




DTC Report




I/M and Mode $06 Report






Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave