Shop by Price
Join our Newsletter
Subtotal: $0.00

> Lab Scopes Accessories > Current Clamp (600A AC/DC) with BNC


Current Clamp (600A AC/DC) with BNC

California Residents: Proposition 65 Warning
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)

The Pico TA019 (pp266) current clamp is ideal for use with a PicoScope automotive oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests.

The black shielded lead is straight (not coiled) and is approximately 10-ft long (3-meters) and terminates to a metal BNC.

The current clamp can measure up to 600 A (AC or DC). In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required.

This current clamp is designed for use with PicoScope oscilloscopes and features additional screening to reduce noise pickup. The shielded lead is 3 meters long (just under 10-ft).

Typical Uses
Given the size and reach of the jaws with this clamp, starter motor current draw tests up to 600 amps are incredibly easy and more importantly non-intrusive on petrol vehicles. Alternator charging systems can also be evaluated (Petrol and diesel) with the TA019 clamp ensuring good accuracy with reduced noise levels, take a look below:
- Relative compression test (Petrol)
- Charging system evaluation (Petrol and Diesel)
- Battery testing with Pico Diagnostic’s software (Petrol)
- Starter motor and circuit evaluation (Petrol)



Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave