The Fluke 233/A Remote Display Automotive Digital Multimeter Kit allows you to be in two places at once. The removable display solves the problems of holding both the meter and the test leads to make a measurement. The Fluke 233/A kit works on both conventional and hybrid vehicles.
Slide the wireless display out of the Fluke 233/A's meter body, place the display where it is most easily seen, up to 10 meters (33 feet) from the point of measurement, keep the meter in the best position to take measurements.
Magnet
The removable display has a magnetic back and flat bottom so it can be mounted or placed on any flat surface.. When the display is attached to the meter body the Fluke 233/a operates as a conventional multimeter.
Detachable Wireless Display:
* Find a comfortable position to view and record test data, even when the test location is hard to reach or in a dirty or noisy environment.
* Attach test leads to brake lights while sitting in the driver seat, pressing the brake pedal and viewing the display.
* Safely view underhood measurements on moving vehicles.
* Separate the tasks of positioning the meter and reading test results, devoting full attention to each job?and working more safely.
* Run tests and read results at a safe distance from high-voltage, high-current systems.
Ready for the hybrids
The Fluke 233/a is safety rated for use in CAT III 1000V, CAT IV 600V working environments, a must for working on hybrid vehicles.
Features
* True-rms ac voltage and current for accurate measurements on non-linear signals
* Measure up to 1000 V ac and dc
* Measure up to 10 A (20 A for 30 seconds)
* 10,000 µF capacitance range
* Frequency to 50 kHz
* Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
* Resistance, continuity and diode test
* Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
* The removable magnetic display can be conveniently mounted where it is easily seen
* Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
* Use as a conventional multimeter when the display is connected
* Radio transmitter automatically turns off when the display is connected to the meter
* Auto power off maximizes battery life
* Min/Max and Average recording to capture variations automatically
* Test continuity and diodes
* Easy to read display with large digits and bright backlight
* Battery life approximately 400 hours
Contents
The Fluke Fluke 233/A Remote Display Automotive Digital Multimeter Kit includes:
* Fluke 233 meter
* Test leads (TL75)
* Alligator clips (AC72)
* Thermocouple probe (80BK-A, Type K, Integrated DMM Probe, Measurement range:-40 to 260ºC)
* Soft carry case
* Meter hanging strap
* Automotive backprobe pins
* Automotive training DVD
