Shop by Price
Join our Newsletter
Subtotal: $0.00

> Multimeters > Fluke 88V Automotive Multimeter Combo Kit


Fluke 88V Automotive Multimeter Combo Kit

F-88-5/A KIT
Your Savings:
$274.00 (27.43%)
California Residents: Proposition 65 Warning
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)
More Info

The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection.

The new Fluke 88V has improved measurement functions, trouble-shooting
features and accuracy to solve more problems on conventional and hybrid
vehicles. The built-in thermometer conveniently allows you to take
temperature readings without having to carry a separate instrument and the
magnetic hanger (included with kit) lets you attach the meter to most steel
surfaces for easy set-up and viewing.

The 88V is made in the U.S.A. and carries the industry leading lifetime warranty.

* Built-in thermometer lets you carry one less tool (temperature probe included)
* Resistance, continuity and diode test
* RPM measurements with inductive pickup (included)
* Millisecond pulse width measurements for fuel injectors
* Frequency to 200 kHz and % duty cycle
* Measure up to 1000 V ac and dc
* Measure up to 10 A, 20 A for up to 30 seconds
* 4 * digits for precise measurements

* Magnet hanger to attach meter to the vehicle and free your hands for other tasks
* Min/Max-Average recording with Min/Max Alert to capture variations automatically
* Relative mode to remove test lead interference from low ohms measurements
* Large display digits and two-level bright white backlight for increased visibility
* Analog bargraph for fast changing or unstable signals
* Access door for fast battery changes without opening up the case

Contents of the 88V/A Automotive Kit
The 88 Series V includes a limited lifetime warranty and is UL and CSA approved. Made in USA.
* 88V Automotive Multimeter
* TL224 1.5 m long heat resistant silicone test leads
* TP220 Removable test probes to pierce corroded terminals
* AC285 Alligator clips
* TPAK Magnetic Hanger to position and hold meter to steel surfaces
* 80BK Temperature Probe
* RPM80 Inductive RPM pick-up probe
* Two back probe pins
* Insulation piercing clip (red)
* Soft Case
* Holster
* 9V battery (installed)
* CD with User Manual

The new 88V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

Hybrid Diagnostics
This multimeter is CAT-III approved and is appropriate for using on hybrid
vehicles. However it is not an insulation tester.




Technical Specifications
Maximum Voltage: 1000V
Accuracy: Fluke 88 V: ±(0.1%+1)
Best Resolution: Fluke 88 V: 0.01 mV
Maximum Voltage: 1000V
Accuracy: Fluke 88 V: ±(0.5%+2)
AC Bandwidth: Fluke 88 V: 5kHz
Best Resolution: 0.01 mV
DC Current
Maximum Amps: 10A
Amps Accuracy: Fluke 88 V: ±(0.4%+2)
Best Resolution: Fluke 88 V: 0.001 mA
AC Current
Maximum Amps: 10A
Amps Accuracy: Fluke 88 V: ±(1.2%+2)
Best Resolution: 0.001 mA
Maximum Resistance: 50 MΩ
Accuracy: Fluke 88 V: ±(0.4%+1)
Best Resolution: 0.1Ω
Maximum Capacitance: 9,999 µF
Accuracy: ±(1%+2)
Best Resolution: 0.01 nF
Maximum Frequency: 200 KHz
Accuracy: ±(0.005%+1)
Best Resolution: 0.01 Hz
Duty Cycle
Maximum Duty Cycle: 99.9 %
Accuracy: within 2% per KHz +0.1%
Best Resolution: 0.1 %
Temperature Measurement
  -200.0°C - 1090°C
  -328.0°F - 1994.0°F, 1.0% excluding probe
80 BK Temperature Probe
  -40 °C - 260 °C
  -40 °F - 500 °F, 2.2 °C or 2% whichever is greater
Maximum Conductance: 60.00 nS
Accuracy: ±(1.0%+10)
Maximum Resolution: 0.01 nS
Operating Range
Operating Temperature: -20 °C - 55 °C
Storage Temperature: -40 °C - 60 °C
  5.2 cm x 9.8cm x 20.1 cm (2.06” x 3.86” x 7.93”)
  624 g (22 oz.)





Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave