The Fluke 88V has improved measurement functions, trouble-shooting features and accuracy to solve more problems on conventional and hybrid vehicles. The 88V is the most powerful automotive multimeter ever offered by Fluke. In addition to having all standard multimeter features like the ability to measure voltage, current, continuity, and resistance, the 88V can perform diode test and pulse width measurements.
This meter can take current measurements up to 20A for 30 seconds and 10A continuously. The optional magnetic hanger lets you attach the meter to most steel surfaces for easy set-up and viewing. The 88V is designed to be used in high energy environments like those found on hybrid vehicles.
Measures
* Resistance, continuity and diode test
* Millisecond pulse width measurements for fuel injectors
* Frequency to 200 kHz and % duty cycle
* Measure up to 1000 V ac and dc
* Measure current up to 10 A, 20 A for up to 30 seconds
* 4 * digits for precise measurements
* RPM measurements with optional inductive pickup
* Temperature measurements with optional temperature probe
Features
The NEW Fluke 88V automotive multimeter is environmentally protected from shop dust and the occasional water splash.
The 88V is made in the U.S.A and carries a limited lifetime warranty to protect your investment.
Automotive test functions including dc and ac voltage, resistance and current. Advanced functions include conductance, duty cycle, frequency and pulse width to test virtually any circuit.
Flight recorder function that records minimum, maximum and average values, capturing and stores intermittent readings. Use this function to monitor oxygen sensors or to capture current drain.
Peak Min Max Recording functions that identify and capture intermittent and momentary events as fast as 250 millionths of a second! Find EMI and RFI noise on signal and ground wires or defective clamping diodes that can damage electronic components.
A built-in thermometer designed to measure and monitor air, surface or immersion temperatures. (Requires optional 80BK temperature probe)
Measure current up to 10 amps continuous or 20 amps for up to 30 seconds. Perfect for keep-alive memory circuits or parasitic drain tests.
A coil test function that uses conductance to find shorts between DIS coil primary and secondary windings.
Plus: AutoHOLD* one-touch feature and Relative Difference Reading Mode.
Contents
* Fluke 88V digital multimeter with High-impact holster
* Test leads with probes permanently attached
* Battery
* CD with User Manual
Certificates
The new 88V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.
Hybrid Diagnostics
This multimeter is CAT-III approved and is appropriate for using on hybrid
vehicles. However it is not an insulation tester.
