Categories
Shop by Price
Vendors
Join our Newsletter
Subtotal: $0.00

> Hybrid / EV Diagnostics > Fluke TP38 Slim Reach Test Probe Set

 
 

Fluke TP38 Slim Reach Test Probe Set

AES#:
F-TP38
 
$30.00
Qty:
 
California Residents: Proposition 65 Warning
 
 
 
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)

CAT III 1000 V slim reach test probes for your Fluke tool.

This probe is thin enough to fit into the Tesla penthouse access ports and long enough to make contact to measure the high-voltage circuit after the car has been powered down as part of Tesla's Vehicle HV Disablement Procedure, this must be performed before the penthouse cover is removed. Learn more about the Vehicle HV Disablement Procedure. The two access holes under the cover are about 10mm in diameter, while the finger guards on most probe-type leads are about 15mm in diameter. So not only is the tech unable to make a measurement, there is a danger that they will *think* a measurement as been made (reading zero volts) while the probe tips cannot bottom out and end up just measuring air.

Compared to the Fluke TP1 porbes, the tips of the TP1 is longer and has more exposed metal making them only CAT II rated. This is not desirable because of the higher chance of accidental shorts.

Key features
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals 120mm (4.7in)  in length
Hard stainless steel probe tips
Insulated Probe Tip ( 3.5mm x 2mm exposed)
- CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
- One year warranty

 

Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave