Categories
Shop by Price
Vendors
Featured Products
Join our Newsletter
Subtotal: $0.00

> Breakouts > LineSPI (customized)

 

LineSPI (customized)

AES#:
08-200-HC
 
$16.00 - $168.00
Qty:
Options to Select:
 
California Residents: Proposition 65 Warning
 
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)

Currently out of stock, NO ETA as of now.

Customize the LineSPI.

Use the selection box above to pick any combination of options to customize the LineSPI:

LEDs on Grounds and Power, pins 4, 5, and 16
When you connect the LineSPI to an OBD2 vehicle, the LEDs for pins 4, 5, and 16 will lite up to let you know that grounds and power are good. If they don't lite up you immediately know there is a problem.
Pins 4 and 5 have green LEDs.
Pin 16 has a red LED.

LEDs on dedicated Comm lines, pins 2, 6, 7, and 10
These yellow LEDs lite up when there is activity on the lines. This option includes a switch to disconnect the LEDs to ensure that nothing on the circuit affects the test measurements. 

Switch to isolate Pin 16 from vehicle
Power up the scan tool with an external source without having to repair the circuit on the vehicle first. Flip the switch to isolate pin 16 of the LineSpi from the vehicle.

Voltmeter
Displays voltage present at the DLC between pins 4 and 16. Monitor and confirm vehicle voltage level during testing or programming.

LEDs for discretionary lines, pins 1, 3, 8, 9, 11, 12, 13, and 14
Sorry, we do not include an option for LEDs on the discretionary lines 1, 3, 8, 9, 11, 12, 13.
The LED on Pin #6 is illuminated for CAN activity which mirrors Pin #14.
The 
LED on Pin #7 is illuminated for ISO and KWP activity which mirrors Pin #15.

Activity on Pin #14 is a mirror reflecton of Pin #6.
Activity on Pin #15 is a mirror reflecton of Pin #7.

 


 

Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave IAP