Shop by Price
Featured Products
MSRP: $248.45
Add to cart for instant quote!
Join our Newsletter
Subtotal: $0.00

> Lab Scopes Accessories > Low Current Probe 0-80 Amps


Low Current Probe 0-80 Amps

Your Savings:
$53.50 (29.16%)
California Residents: Proposition 65 Warning
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)
More Info

Use this low amp probe for accurate measurement of low current.

Use with your graphing meter or lab scope to view current waveforms on fuel injectors, fuel pumps, primary ignition coils and more. Also works very well with digital multimeters.

This low amp probe has a resolution of 10 milliamps which is low enough for most parasitic drain testing. In addition, the clamp opening of 1/2 inch is large enough to clamp over most negative battery cables for those parasitic drain tests.

Test Ranges
* DC Amps: 0-20A, 0-80A (resolution .01A)
* AC Amps: 0-20A, 0-80A (resolution .01A)

* Compatible with many lab scopes and graphing multimeters
* Use to generate current waveforms for diagnostic analysis
* Also works great with digital multimeters
* Jaw opening of 1/2 inches clamps over most negative battery cables
* Low battery indication, Auto Power-Off




The bandwidth of the 695 Amp Probe is 20Khz


General Specifications

Captured Conductor Size: opening .5 inch
Low Battery indicator: red LED lighting
Operating Temperature: 0 degrees C to 50 degrees C, 70% R.H.
Storage Temperature: -20 degrees to +70 degrees C, 80 % R.H.
Battery Type: 9V DC NEDA 1604, 6F22, 006P
Battery Life: 80 hours typical with alkaline
Weight: 240g typical
Dimensions: 190mm(H)x70mm(W)x38mm(D)
Output: banana plug


Electrical Specifications

(At 23 +/- 5 degrees C, 70% R. H. maximum)

Effective Measurement Range

20A (output: 100mV/A=1mV/10mA): greater than 2A use DC or rms AC for 200mV range of the multimeter, greater than 2A use DC or rms AC for 2V range of the multimeter.

80A (10mV/A): DC or rms AC for 200mV range of the multimeter.

Current Clamp Accuracy:

DCA range: 10mA~20A
(output: 100mV/A = 1mV/10mA)+/-(3% +/- 5mA)

DC range: 100mA~80A (output: 1mV/A)
+/-(3% +/- 0.3A) 100mA~40A
+/-(4% +/- 0.3A) 40A~80A

ACA range: 10mA~20A (output: 100mV/A = 1mV/10mA)
+/-(3% +/- 5mA) 10mA~20A ( 40Hz~2kHz)
+/-(4% +/- 30mA) 10mA~20A ( 2kHz~10kHz)
+/-(4% +/- 30mA) 10mA~20A ( 2kHz~10kHz)
+/-(4% +/- 30mA) 10mA~20A ( 2kHz~10kHz)

AC range 100mA~ 80A (output: 1mV/A)
+/-(2% +/- 30mA) 100mA~80A ( 40Hz~1kHz)
+/-(4% +/- 30mA) 100mA~80A ( 1kHz~2kHz)
+/-(6% +/- 30mA) 100mA~80A ( 3kHz~5kHz)
+/-(8% +/- 0.3A) 40A~80A (40Hz~5kHz)
Load Resistance: 10k Ohm typical


Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave