Shop by Price
Join our Newsletter
Subtotal: $0.00

> Lab Scopes Accessories > Pressure Transducers > Low Pressure Fuel Kit (Sight Block) for WPS500X

Sample Test

Low Pressure Fuel Kit (Sight Block) for WPS500X

California Residents: Proposition 65 Warning
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)

Backordered! ETA = sometime after July.

The Pico PQ071 Sight Block Kit is a low pressure fuel kit for use with the WPS500X.

The Low Pressure Fuel Kit (Sight Block) connects in series with the fuel line between the tank and the fuel pump. It also connects to the WPS500X which converts the pressure/vacuum into a voltage signal that the PicoScope will display. 

• Verify priming pressure
• Verify if fuel is aerated
• Run the fuel pump under load to test negative pressure by closing the Stop Tap (valve)

1- Sight Block (transparent)
1- Fuel Pressure Stop Tap
2 - 6mm Host Tail
2 - 8mm Host Tail
2 - 10mm Hose Tail

NOTE: Maximum working pressure 7 bar / 100psi / 700KPa.

Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave