Shop by Price
Join our Newsletter
Subtotal: $0.00

> Scan Tools Accessories > MaxiScope by Autel

Capturing the glitch from a Snap-on signal generator

MaxiScope by Autel

Free Shipping within the USA, use coupon:
Your Savings:
$354.00 (48.56%)
California Residents: Proposition 65 Warning

The Autel MaxiScope MP408 is a 4-channel automotive oscilloscope that works in combination with Autel MaxiSys ms908 tablets. Power for the MaxiScope MP408 Module comes directly from the USB port of the MaxiSys tablet.

• Features one-click auto setup of voltage scale and time base
• Works on all makes and models of modern vehicles
• Compatible with LIN, CAN and FlexRay data bus standards
• Reads and displays electrical signals in high resolution waveforms
• Allows manual editing of measurement parameter display
• Saves and reviews waveform data
• Features color coded 4-channel control panel
• Intuitive UI design features easy trigger point adjustment and real time scale info display
• Direct power supply through USB connection
• Free online software update through the Internet
• Portable design with strong housing and protective rubber boot

• USB Cable X1
• 3m (10ft) Screened Test Leads - X4
• Secondary Ignition Pickup - X1
• 2-pin Breakout Lead - X1
• Attenuators 20:1 - X2
• Large Crocodile Clip Set - X1 Pair
• Small Crocodile Clip Set - X1 Pair
• Acupuncture Probe Set - X1
• Multimeter Probes – X1 Pair
NOTE: carrying case not included.


Vertical resolution   12 bits
Channels   4
Bandwidth   20MHz
Accuracy   1%
Sensitivity   10mV/div to 20V/div
PC Interface   USB 2.0 – Cable supplied
Power Requirements   Powered from USB port
Input Ranges (full scale)   ±v50mV to ±100V in 11 ranges
Input Impedance   1MΩ in parallel with 22pF
Input Type   Single-ended, BNC connector
Input Coupling   Software selectable AC/DC
Overload Protection   ±200V on single input
Buffer Memory   32M samples shared among active channels
Waveform Buffer   Up to 1000 waveforms
Timebase Ranges   100ns/div to 1000s/div
Operating Temperature Range   0°C to 50°C (15°C to 40°C for quoted accuracy)
Storage Temperature Range   -20°C to +60°C
Storage Humidity Range   5% to 95%RH, Non-condensing
Dimensions   190X115X38mm
Weight   < 0.5kg
Maximum Sampling Rate (Single Shot)    
1 or 2 channels in use   80MS/s
3 or 4 channels in use   20MS/s


Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave