Categories
Shop by Price
Vendors
Join our Newsletter
Subtotal: $0.00

> Flash Programming > MaxiVCI V200

 

MaxiVCI V200

AES#:
atl-VCI-200
UPC:
2202.03.01
 
$250.00
Qty:
 
California Residents: Proposition 65 Warning
 
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)

The VCI200 is compatible with all Maxisys scan tools and is a good upgrade over non-CAN FD compliant VCI100 dongles that came with the older MS906BT and MS906TS. It can also be used in place of the Ultra's VCMI for a lighter weight, more portable interface.

The VCI200 can also be used as a standalone J2534 interface. It is not compatible with WiTech (Chrysler) or Nissan R2R software.
To use the VCI200, download Autels Maxi PC Suite to install the necessary drivers.

The VCI200 supports DoIP and canFD (4-pin sets) and is compatible with the following:
BT608
BT609
ITS600
KM100
MS906BT, requires updates from 2022 or newer
MS906TS, requires updates from 2022 or newer
MS908 / MS908s, requires updates from 2022 or newer
MS908p / MS908sp, requires updates from 2022 or newer
Elite, requires updates from 2022 or newer
MaxiADAS, requires updates from 2022 or newer
MS906Pro
MS906Pro-TS
MS906 MAX
MS906TS MAX
MS909
MS919
Ultra 

MaxiVCI V200 Supported Protocols
ISO 9142-2, ISO 13400, ISO 14230-2, ISO 15765-4, K-Line, L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, High speed, Middle speed, Low speed and Single wire CAN (SWCAN), GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN, CANFD

 

Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave