Shop by Price
Join our Newsletter
Subtotal: $0.00
Blog Tags

> Lab Scopes > PicoScope 4425 4-Channel Starter Diagnostic Kit


PicoScope 4425 4-Channel Starter Diagnostic Kit

Was: $1,529.00
Now: $1,453.50
Your Savings:
$161.50 (10%)
California Residents: Proposition 65 Warning
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)
More Info

For the new PicoScope 4425A Starter Kit, click here.


The 4–Channel PicoScope Starter Kit (PP922) includes the original PicoScope 4425.

To keep costs down it is supplied with a basic set of leads and clips to allow you to perform many common tasks including testing most sensors, actuators, relative compression and cylinder balance tests.

When you’re ready simply purchase additional accessories to upgrade to a standard or advanced kit.

Contents of the 4-channel PicoScope STARTER Diagnostic Kit
Scope Module
  1 - 4425 Scope Module with Boot (PP919)
Test Leads and Breakouts
 1 - Premium Test Lead: 3M BLUE (TA125)
 1 - Premium Test Lead: 3M RED (TA126)
 1 - Premium Test Lead: 3M GREEN (TA127)
 1 - Premium Test Lead: 3M YELLOW (TA128)
 1 - 10:1 Attenuator (TA197)
Probes, Clips and Adapters
 2 - Small crocodile clip black (TA003)
 2 - Small crocodile clip red (TA004)
 1 - Battery Clip (Red) (TA157)
 2 - Battery Clip (Black) (TA158)
 2 - Flexible backpinning Probe (Black) (TA161)
 2 - Flexible backpinning Probe (Red) (TA162)
 1 - Rainbow Boot for 4425  (PR106)
 1 - USB 3.0 Cable 1.8m Blue  (TA155)
 1 - Telescopic pack: 45x45 length 80-120mm (PA038)
 1 - Carton: Large Pico branded (PA050)
 1 - Quick start guide 
 24-months - Scope module
 12-months - Accessories

Computer Requirements
To ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.

Item Specification
Operating System
32–bit or 64–bit editions of:
- Windows 10
- Windows 8 (not Windows RT)
- Windows 7
As required by the operating system
As required by the operating system
Free disk space
As required by the operating system
USB 3.0 or USB 2.0 ports(s)














PicoScope is suitable for use with any modern vehicle

The Pico Automotive Diagnostics Kit can be used to measure and test virtually all of the electrical and electronic components and circuits in any modern vehicle including:

- Ignition (primary and secondary)
- Injectors and fuel pumps
- Starter and charging circuits
- Batteries, alternators and starter motors
- Lamda, Airflow, knock and MAP sensors
- Glow plugs / timer relays
- CAN bus, LIN bus and FlexRay


Educators share with the whole class


Educators will also benefit from using the PicoScope because it allows an entire classroom to see live vehicle waveforms when you have your PC hooked to an LCD projector.


Waveform Library

One of our most popular features of the PicoScope is the Waveform Library, you can search a global data base of waveforms uploaded by PicoScope users from around the world.

To access the Waveform Library you must have an automotive scope connected to your PC and have a valid user name and password to the Pico Automotive Forum.

Once logged into the Waveform Library Browser you will find numerous “Search Options” allowing you to locate a relevant waveform for a specific manufacturer or model. You can also search for a waveform using just the engine code, allowing you to locate a waveform that may not have been saved under your search entry, but is applicable to other models or manufacturers using that engine.



Picoscope Basics, part 1 with ScannerDanner


Picoscope Basics, part 2 with ScannerDanner


Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave IAP