Shop by Price
Join our Newsletter
Subtotal: $0.00

> Lab Scopes Accessories > Power Probe Digital Clamp Meter


Power Probe Digital Clamp Meter

California Residents: Proposition 65 Warning
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)

The Power Probe Digital Clamp Meter is an 80amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter’s diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Digital Clamp Meter , 80 amp
- Test Leads
- Thermocouple Probe
- 3x AAA batteries
- Carrying Case
- User's Manual

Voltage: AC 600V DC 600V
Current: AC 80A DC 80A
Display 4000 counts
Jaw Opening 24mm/0.9”
Auto & Manual Ranging
Auto Power Off
Non-Contact Voltage Detector
Diode Open Voltage 3.2V
Continuity Buzzer <50Ω
- Data Hold
- Large LCD Display Backlight
- Work Light
- Low Battery Display



Auto-range Yes
Overload protection CAT III 600V
Max voltage between terminals and earth ground 600V DC or AC
Operating altitude ≦2000m(6500ft.)
Display 3 3/4 digit LCD display
Max reading 4000
Polarity Indication display automatically shows “-”
Over-range Indication display shows “OL” or “-OL”
Power 3 x 1.5V AAA Batteries
Low Battery Indication “  ” will appear on the display.
Temperature coefficient less than 0.1 x accuracy/°C
Operating temperature 18°C~28°C (64°F~84°F)
Storage Temperature -10°C~50°C (14°F~122°F)
Operating Humidity <80%
Operating Environment Indoor Use
Pollution degree 2
Dimensions 195x80x45mm
Weight approx. 195g (including batteries)


Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave