Categories
Shop by Price
Vendors
Join our Newsletter
Subtotal: $0.00

> Lab Scopes Accessories > Primary Ignition Probe for the uScope 10:1 attenuator

Red Primary Probe connected between green test lead and yellow piercing probe
 

Primary Ignition Probe for the uScope 10:1 attenuator

AES#:
01-18-u
 
$29.00
Qty:
 
California Residents: Proposition 65 Warning
 
 
 
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)

With the AES uScope® Primary Ignition Probe Adapter, you can fit an 800 volt signal on the display of the uScope.

The AES Primary Ignition Probe Adapter is designed specifically for the uScope and for testing primary ignition.

Some primary ignition systems have a voltage signal which peaks at over 400 volts. The AES uScope Primary Ignition Probe Adapter makes it possible to fit a primary ignition signal on the uScope.

The probe attenuates the signal by a factor of 10 - an input voltage of 400v into the probe attenuates the signal to just 40 volts – a safe value that the uScope can easily display.  This attenuation is necessary to fit the full primary ignition signal on the uScope scope display which has a max of 80 volts.

 

 

 

Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave