AutoEnginuity ScanTool 11.2 release adds new features and improves coverage for US, Asian, and European enhanced.
Key features for this release are:
• Fiat coverage has been added to the European Bundles.
• BMW: Added late-model diesel system functions: Quantity Mean Value Adaptation, EGR Valve Calibration, MAF Calibration, Rail Pressure Valve Adaptation, and Particulate Filter Regeneration to name a few
• GM: Improved light trucks ’00 – ’05 bitmapped sensors coverage
• Jaguar: Added XF 10+ diesel system functions: Oil Service Reset, Force Particulate Filter Regeneration, and Particulate Filter Replacement
• Nissan: Added late-model diesel support for European models
• Toyota: Improved sensor and actuation coverage matrixes by using the updated method of reading coverage from the vehicle’s memory.
• Added hi-resolution monitor support (96 DPI)
More details listed below.
The latest coverage for Fiat, BMW, and Toyota require the Proline VCI connector hardware with firmware 38.
Plus, the AutoEnginuity Scan Tool is compatible with Windows 8 pc and tablet.
Available from AESwave, the complete line of AE bundles:
Interview
In this edition of "In The Workshop", Motor Age technical editor Pete Meier welcomes Jay Horak, creator of the Autoenginuity PC-based automotive scan tool. Jay tells us about how the tool was born, why aftermarket scan tools designed for multiple applications will never be everything for everyone, and shows us the latest innovation from AE...the AE Vehicle Communications Interface (VCI). He also lets us in on some future possibilities AE has in the works.
Update details for ScanTool Version 11.2
Audi / VW
• Fixed incorrect engine DTC description reporting CAN-based models
BMW / MINI
• Added DDE 5.0 M47 / M57 diesel special function support:
Air Mass Flow Calibration
Reset Quantity Mean Value Adaptation
Reset EGR Calibration to Zero
Reset Injection Rate Reset Calibration To 100 Percent
Reset Consumption Calculation Reset To Calibration To Neutral
Request Particulate Filter Regeneration and Replace of Particulate Filter
• Added DDE 6.0 N57 and DDE 7.0 N57 / N47 diesel special function support:
Reset Hot Air Film Mass Sensor
Reset Exhaust Back Pressure Sensor before Turbocharger
Reset EGR Valve
Reset Rail Pressure Regulating Valve Adaptation
Reset Radiator Shutter Variant
Reset Electric Fuel Pump Adaptations
Reset EGR Valve Adaptations
• Added missing 318d (E90) model support
• Added X3 10 - 13 (F25) ASCM and IHKA full system support
• Added missing X6 xDrive3.0d, xDrive3.5d, and xDrive4.0d (E71) model support
• Added Replacement Battery Registration to DDE (diesel) models
• Fixed Airbag ZAE controllers (early 96 - 99MY) not retrieving trouble codes in some cases
• Fixed Retrieve DTCs 'All' selection not working
• Fixed actuations showing a completion message twice
• Fixed DDE 6.0 M57 / N57 Intake Air Temperature reporting incorrect value
• Improved Conditional Based Service displaying of service information by allowing for controllers to take longer to respond
Chrysler-family
• Added 'Key-On Engine Running' instructions for the ESIM system test for CAN-based modules
• Added 'Key-On Engine OFF' instructions for the Fan actuation for CM845 and CM848 Cummins
• Removed Contribution Test from the Cummins CM845 module '03 - '04 as the module does not actually fully support the test
• Fixed missing body codes for Dodge Charger '08 not allow selection of engine
• Changed the maximum sensor value for Cylinder Contribution test to 255 for CM845 and CM848 Cummins
GM-family
• Added engine entry for the Cadillac CTS '04 5.7 Liter
• Added missing bitmap and state sensors for '00 - '05 C/K Truck Body Modules
• Added missing bitmap and state sensors for '00 - '05 S/T Truck Body Modules
• Added missing EGR sensors for the Silverado 5.7 Liter
• Added Injector 6 for the Fuel Injector Balance command for the '06 4.2 Liter LL8 (S)
• Improved performance on CAN-based modules that don't allow you to select all sensors
• Fixed Fuel Tank Pressure scaling issue for the Silverado '07 and the Lacrosse '10
• Fixed missing freeze frame information being pulled from VPW-based engines
Honda / Acura
• Added ABS support for the Acura TL '98
• Fixed the labeling of SRS codes that are pulled as history, but were labeled as current
• Fixed not completing retrieving DTCs from Acura MDX '09
Jaguar
• Added XF 10MY+ diesel support (includes Oil Service Reset, Force Particulate Filter Regeneration, and Particulate Filter Replacement)
Nissan / Infiniti
• Added support for CAN ABS (EU Version)
• Added support for diesel CAN models (Juke, Micra, Navara, NV, Pathfinder, QashQai, XTerra)
• Added PTC Heater CAN full system support
• Improved European model coverage support
Toyota / Lexus / Scion
• Added support for reading the exact PID list from the vehicle using the newer initialization methom
• Added Toyota of Europe Auris HV model support
• Added Charging Control CAN full system support
• Added 4WD Drive CAN Reset Memory and 4WD Control Prevention Mode system tests support
• Improved actuation lists for CAN-based models. The actuation list, command names, and descriptions are set to be exact with the TechStrea
• Fixed Occupant Classification Zero Calibration not working