AutoEnginuity has released the 11.0 version of its ScanTool software which updates the tool with 2012 Model Year support for enhanced coverage across the board for Domestic, Asian, and European.
Plus, the AutoEnginuity Scan Tool is now compatible with Windows 8 pc and tablet.
Update details....
General
• Added Windows 8 support
• Fixed tabs and Actuation tab from not allowing font and font size changes
• Fixed Freeze Frame not working on ProLine connectors on older ISO vehicles
• Changed if "Non-OBDII Only" is set as the Vehicle Initialization Type, the O2 and OnBoard Test Results tabs will be hidden until OBDII is re-enabled
Audi / VW
• Added 12MY enhanced coverage
• Fixed issue with software crashing when loading sensor groups for Audi A4 '01
BMW / MINI
• Added 12MY enhanced coverage
• Added X1 xDrive and sDrive diesel and petrol model support
• Added 128i N52 DME full system support
• Fixed CBS Oil Service Reset for 520i - 535i '04 - '07
• Finalized X5 xDrive50 controller support
Chrysler-family
• Added 12MY enhanced coverage
• Added Transmission support for the Dodge Durango '03
• Added ABS Initalize ECU system test for CAN-based vehicles
• Added UDS-based system configuration:
• Auto Door Locks
• Front License Plate Configuration
• Maximum Vehicle Speed
• Module Configuration Setup
• !!! See website for more information !!!
• Added UDS-based system tests:
• Actuator Calibration Test
• Brake Pedal Sensor Calibration
• Cool Down Test
• Door Handle Verification Test
• Immobilizer Antenna Test
• Initalize ORC
• Locate learned keys
• Tire Size Programming (BCM Powernet modules)
• !!! See website for more information !!!
• Updated Cylinder Cutout actuation descriptions for the following modules:
• CM552
• CM845
• CM848
• Fixed issue when configuring CAN-base modules certain settings were being turned off when not turned off by the user
• Fixed issue when DTCs were failing to clear on UDS-based modules
Ford-family
• Added 12MY enhanced coverage
• Improved PATs Key Programming for CAN models by adding more error condition reporting to the user
• Fixed As-Built support
GM-family
• Added 12MY enhanced coverage
• Added ESC system support for Cadillac '05 - '06
• Added the following functions to the system test tab for CAN-based modules:
• Brake Pedal Position Sensor Learn
• Brake Pressure Calibration
• Fuel Injector Balance
• Steering Position Sensor Learn
• Yaw Rate Sensor Learn Command
• Added bitmaps and state sensors to '08 engines
• Added Automatic Brake Bleed for the Chevrolet '06 W body code
• Added SDM Setup for the Common Arc SIR Module
• Added Key FOB Programming for the following CAN-based modules:
• Common Arc Omron
• RFA LEAR GMLAN
• !!! See website for more information !!!
• Fixed the decimal place of TDC Offset sensor from 2 to 3 places
Honda / Acura
• Added 12MY enhanced coverage
• Added Blind Spot Information module support
• Fixed drop out of SFT actuation commands on Non-CAN modules
• Removed the Tire Sensor ID Learn test from the TPMS module for Type B modules since those modules do not support that test
Hyundai / Kia
• Added 12MY enhanced coverage
Isuzu
• Added 12MY enhanced coverage
Jaguar
• Added 12MY enhanced coverage
• Fixed Park Aid Module (older ISO version) not retrieving trouble codes without the History option selected for Current codes
• Fixed Electronic Parking Brake Release for Service on the XJ8 and VDP 06 - 12MY
Land Rover
• Added 12MY enhanced coverage
Mazda
• Added 12MY enhanced coverage
• Added As Built support for CAN-based controllers
• Added Mazda2 '11 - '12 EPS Steering Calibration support
• Added Removable HardTop full system support
Mercedes Benz
• Added 12MY enhanced coverage
• Added S Class (W221) Service Reset (Service 229.5) support
• Added S Class (W221) Active Body Control Rodeo and Pitch system tests
• Added C Class (204), E Class (212), and GLK Class (X204) Teach-In Anti-Pinch Protection support
• Added E Class (212) ESP Teach-In Component Yaw Rate and Longitudinal Sensor B24/15 support
• Improved E Class (212) system coverage
Mitsubishi
• Added 12MY enhanced coverage
Nissan
• Added 12MY enhanced coverage
• Added missing Mode 6 descriptions for CAN-based models
Subaru
• Added 12MY enhanced coverage
Toyota-family
• Added 12MY enhanced coverage
• Fixed EMPS CAN Torque Sensor Adjustment not working on late-model vehicles