{"product_id":"current-probe-low-range-with-banana-plugs","title":"Current Probe, Low range, with Banana Plugs","description":"\u003cp\u003eThis cost-effective low current probe is ideal for capturing waveforms from fuel pumps, injectors, relays, ignition and more. This probe can be used with just about any meter and lab scope capable of measuring DC voltage.\u003c\/p\u003e\n\u003cp\u003eThis low amp current probe can be used with multimeters and lab scopes and such as the Snap-on MODIS™, VANTAGE®, VERUS®, UEI scopes, Vetronix. In essence it can be used with any scope\/meter that displays a voltage in digital or waveform format.\u003c\/p\u003e\n\u003cp\u003eThis amp probe features shielded wire, shielded housing, and 4mm shrouded banana plugs ensure an accurate signal.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003eThis current probe has the smallest nose (1\" x 1\/2\") we have found.\u003cbr\u003eZero push button (not wheel).\u003cbr\u003eLow battery indicator.\u003cbr\u003eLead terminates to banana plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Current Probe Comparison\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAES compared the Generic Low Amp Probe (AES# 07-60) to the Fluke 80i-110s Low Current Probe . The Fluke probe sells for over $400.  Is it worth 4x the price?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmall Nose\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nose on this current probe measures 1-inch by 1\/2-inch. As thick as your thumb and as wide as a US Quarter.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/07-60-Small-nose.gif?v=1743118155\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting to a BNC connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.aeswave.com\/AES-Flexible-Adapter-Banana-Sockets-to-BNC-Male-p8513.html\"\u003eAES# 08-88-m Flexible Adapter\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto connect the Generic Low Amp Probe (AES# 07-60) to scopes that use a BNC connector.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/resources.aeswave.com\/old\/new\/www\/images\/products\/104\/appnote\/0888m%20and%200760.gif\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuel injector Current Waveform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the Generic Low Amp Probe (AES# 07-60) to measure injector cirucit current flow on sarurated, peak-and-hold and frequency modulated circuits. This example shows peak-and-hold injector current on a GM truck.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.aeswave.com\/uploads\/image\/07-60_Fuel-injector-Current-Waveform.gif\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary Ignition Current Waveform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the Generic Low Amp Probe (AES# 07-60) to measure primary ignition current on Distributor, EI(DIS), and COP systems. Use this technique to spot bad coils, bad modules, simplify no-start diagnosis, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.aeswave.com\/uploads\/image\/07-60_Primary-Ignition-Current-Waveform.gif\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuel Pump Current Waveform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the Generic Low Amp Probe (AES# 07-60) on fuel pump circuits to find bad commutators, brushes, worn pump mechanisms and more. A great way to predict pump failure before it happens and find the cause of certain intermittent problems. This technique applies to other electric motors as well such as blower motors, window motors, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.aeswave.com\/uploads\/image\/07-60_Fuel-Pump-Current-Waveform.gif\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScope voltage resolution limitations\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome scopes do not have very fine settings at low voltage levels, such as, 50mV per division. Since most low current probes have a 100mV\/A output, this means that extremely low current waveforms such as from some injectors may be small and not very detailed. This is an issue with the scope, not the current probe. To overcome this, try using a \"current multiplier\". Coil a piece of wire 10 times. Place this coil in series with the circuit being tested. The measured current will now be ten times the actual current.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not connect to the \"Amps\" input\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCurrent probes output a voltage in response to current flow so they must be connected to a voltage input, not your meters \"Amps\" input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimplify Calibration Settings\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Generic Low Amp Probe (AES# 07-60) has it's calibrations expressed in an unusual manner. They represent a very simple relationship though. 1mV\/10mA can be expressed much simpler as 100mV\/A and 1mV\/100mA is more easily expressed as 10mV\/A. Adding a piece of tape to the probe with these simpler labels is very helpful.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParasitic Draw Testing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the extremely low current levels involved with parasitic battery drain, the Generic Low Amp Probe (AES# 07-60) and other low current probes may not be the ideal tool for this application. We instead recommend a traditional series test with an amp meter. The AES Generic Low Amp Probe is ideal for solenoids (injectors, relays), primary ignition, motors (fuel pumps, power windows)and other applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003eSize at end of jaw: 1\" wide x 1\/2\" thick x 2-1\/4\" long\u003cbr\u003eConductor opening: 9mm\u003cbr\u003eTest Lead: 6-feet long, terminates to shrouded Banana Plugs 4mm\u003cbr\u003eProbe Housing: 7-3\/4\" x 2-1\/2\"\u003cbr\u003eAccuracy: ranges from 1.5% to 2% under 20A and up to 8% over 20A.\u003cbr\u003eRange: 10mA-60A\u003cbr\u003eFrequency response: Up to 20KHz.\u003cbr\u003e1-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AESwave","offers":[{"title":"Default Title","offer_id":45667307880761,"sku":"07-60-BP","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Current_Probe__Low_range__with_Banana_Plugs_07-60-BP_1.webp?v=1744230097","url":"https:\/\/www.aeswave.com\/products\/current-probe-low-range-with-banana-plugs","provider":"AESwave","version":"1.0","type":"link"}