Categories
Shop by Price
Vendors
Join our Newsletter
Subtotal: $0.00

> Scan Tools > VCM Scanner with MPVI3 from HP Tuners

 
 
 
 
 

VCM Scanner with MPVI3 from HP Tuners

AES#:
HPT-MPVI3
 
$399.99
Qty:
 
California Residents: Proposition 65 Warning
 
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)
Description
Videos

Elevate Your Diagnostic Abilities with the VCM Scanner + MPVI3 from HPTuners.

Although HPTuners is well-known for tuning, their VCM Scanner with the MPVI3 OBD-II interface is a powerful diagnostic scan tool that leverages OBD-II diagnostic information in a way that will help you solve problems and take your diagnostic scanning to the next-level. 

Control How to View Your Data
Customize the PID list and the display of gauges, charts, and graphs (tables/histograms) when viewing live vehicle data or a log file. Save and reuse custom layouts.

View Data the Same Way the ECM Does
Use the Graph Panel Tables to plot live data from the ECM for any PID. Select two PIDs to calculate a third PID. For example, for a P0299 Under-Boost condition select Engine Speed (RPM) and Desired Boost (kPa) to calculate and plot Boost Error. To calculate Long Term Fuel trim select Manifold Absolute Pressure (kPa) and Engine Speed (RPM).

Perform Math Functions 
The VCM Scanner software allows you to create custom math parameters to monitor the difference between two PIDs. For example, you can create a custom math parameter to track the difference between Desired Boost and Actual Boost. This custom math parameter can then be displayed as a gauge, graph, or chart.  The VCM Scanner software includes many predefined math parameters, and you can add up to 10 custom math parameters.

Math Channel Setup for Boost Error on a 2013 GM DTCP1155

Scan Tool Functions of the VCM Scanner with MPVCI-3

  • Read and Clear OBD2 DTCs
  • View Freeze Frame Data
  • Check Emissions Monitor Status
  • View and log data streams
  • Bidirectional controls for powertrain
  • Special Functions (Throttle Relearn, Reset Trans Adapts, Speedometer Calibration for Tire Size or Gear Changes, and more)
  • Standalone Data Logging lets you log data directly to internal storage of your MPVI3 without being tethered to a laptop

 

Vehicle Coverage
Audi/VW, Bobcat, GM, CAN-AM, Stellantis/Chrysler, Ford, Honda, Hyundai, Indian, Nissan/Infiniti, International, Isuzu, Jaguar/Land Rover, Mazda, Mercedes, Polaris, Porsche, Saab, Sea-Doo, Subaru, Suzuki, Toyota, and more. Complete list of supported vehicles. 

Contents
- MPVI3 Interface
- USB Cable
- 1-year warranty

Note: Credits are NOT REQUIRED to use the MPVI3 with the VCM Scanner for diagnostics. 

System Requirements
- Operating System: Microsoft Windows 10 or newer on a Windows-based PC or laptop (Running Windows on Mac or Linux is not supported)
- Processor: 2 GHz x86 CPU (ARM processors are not supported)
- Memory: 4 GB RAM
VCM Scanner included with the VCM Suite Scanner/Editor (free download): Download VCM Suite
- VCM Suite software prerequisite (free download): Net 8 Desktop Runtime Windows X64

Note about Datalogging
Standalone Data logging does not work with these controllers.
-  Global B (New GM, however we are working on supporting this with Standalone)
-  Ngc3 (Older Stellantis)
-  EEC (Older Ford)
-  JTEC (OLD OLD Stellantis)
-  MG1 (New Powersports) however this one is in the works!

 

 

Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave