ADAS MA600 Package (LDW)

The Autel ma600 features a foldable, mobile-friendly frame and set of LDW targets. Autel may expand it to include calibrations that use the Corner Reflector and AVM patterns.

The Base Stand is approx 28 x 26 and 42-inches tall, 75 lbs when assembled. It can be quickly disassembled and assembled into 3 pieces:
- Base with the casters (approx 35-lbs)
- Stand
- Folding crossbar (both arms are one piece)
COMPARISON: The standard frame (red) weighs about 200 lbs and is not easily dissassembled.

The MA600 software only offers LDW calibration instructions and the package only include LDW targets.

Autel says tablets with previously active ADAS application software are NOT compatible with the MA600. Since the MA600 uses a different frame, its software uses different setup instructions. 
- The Standard software gives setup instructions for the standard red frame.
- The MA600 software gives setup instructions for the MA600 frame.

To reduce weight of the new kit, Autel redesigned the large targets to make them more portable. This means you may not be able to use targets from the original ADAS kits with the new ma600 kit.

The MA600 includes a large assortment of targets.
Will Autel create add-on kits for additional LDW targets? They probably will.
Will the ma600 be able to do AVM calibrations? Maybe. If it does, the large AVM patterns will be sold separately.
Autel may enable the ma600 to do calibrations that use the Corner relfector. 

To use the Autel MA600 ADAS Calibration package you must have both of the following:
- Maxisys tablet. The MA600 is compatible with the ms906BT and the ms906TS, as well as the ms908, ms908s, ms908p, ms908sp, ms908 Elite. List of currently available units.
- ADAS Application Upgrade card.