Free Shipping Promo Code: ATSfreeGround, in stock now!
Use the BULLSEYE to find leaks in all sealed systems in just 3 easy steps:
1. The BULLSEYE CO2 regulator pressurizes the sealed system with residue free system-safe CO2.
2. The BULLSEYE Leak Detector finds the area of the leak.
3. The BULLSEYE Leak Seeker Foam changes color to pinpoint the leak.
It's the only system that quickly and precisely locates leaks of all sizes, large to very small, indicates the size of the leak, and that directly controls ALL vent & purge valve solenoids at the push of a button.
Finds leaks in EVAP systems, A/C systems, engine cooling systems, head gaskets, tires and wheels, air ride suspensions, air brakes, and much more...
Use the BULLSEYE to find leaks in EVAP systems, A/C systems, engine cooling systems, head gaskets, tires and wheels, air ride suspensions, air brakes, antifreeze, radiator, water pump, block etc….
If you can seal the system you can use the BULLSEYE to find leaks on forced induction as well as naturally aspirated engines.
Why CO2?
- CO2 is one of the smallest molecules and is heavier than air, thus, it falls, instead of rises like helium or hydrogen.
- Since the CO2 molecule is so small, it will move through small leak sites with very low resistance.
- CO2 is an inert gas with a triple bond so the CO2 will not break down or combine with any other chemicals making this truly system-safe.
Did you know you can use the ATS Bullseye Leak Detector to test for EV battery leaks in addition to AC and EVAP leaks?
For example, the Nissan Leaf (2013-newer) has a top battery cover that is liquid sealed to the battery case. Removing the cover requires cutting the liquid gasket. To reinstall the battery cover, a new seal must be applied, properly cured, and then checked for leaks.
To properly test the integrity of the liquid gasket the battery's electrical connectors (which naturally leak) must be sealed off.
Use the ATS Bullseye Leak Detector to pressurize the battery with CO2 by connecting a hose to the dedicated leak port. Then use the ATS CO2 IR Detector to follow the perimeter of the top cover. If CO2 is leaking, the IR Detector will sound an alert. To confirm the location of the leak use ATS Leak Seeker Foam, you'll know you found the location when the pinkish foam turns yellow as it reacts to the leaking CO2.
Kit Contents
The BULLSEYE Leak Detector IR Pro Kit (AES# ATS-LDT3000) includes all the items pictured below in the left column along with a storage case
