Free Shipping Promo Code: ATSfreeGround
This item may take 1-2 weeks to ship out.
The ATS iEA Intelligent Engine Analyzer (EMI0130) lets you view In-cylinder, intake, and exhaust pressures simultaneously using multiple transducers when used with any of ATS scopes, such as the ESCOPE ELITE4 and the ELITE8.
Camshaft timing off by one tooth?
That’s a very difficult challenge that could take hours of your time to prove. What if you could tell that the camshaft timing is off by as little as one tooth, in as little as five minutes. You would think we were CRAZY…. Well we aren’t! Our iEA - Intelligent Engine Analyzer uses advanced technology to check the pressure changes in the cylinders THROUGH THE SPARK PLUG HOLE!
INCREDIBLE? We think so.
Got a random misfire code, miss-identified misfire code, or no code at all but the vehicle is misfiring? Another very difficult challenge that will take hours of your time to figure out. Our iEA shows you which cylinder or cylinders are missing through the exhaust tailpipe and then checks the mechanical condition of the cylinder through the spark plug hole in just minutes! ATS’ revolutionary iEA software automatically identifies problems and alerts the technician; saving hours of diagnostic time.
Here's what the iEA will for you
► Quickly identify camshaft timing problems through the spark plug hole.
► Quickly identify misfiring cylinders from the exhaust tail pipe.
► Find problem cylinders and identify them quickly.
► Misfire counters provide information on which cylinders misfired and counts how many times the misfire occurred.
► Alert you to a bank misfire, random misfire, or individual misfire.
► Check cranking, intake and exhaust pressure pulsation confirming mechanical condition of engine quickly.
► Check restricted exhaust system.
► Check ignition timing.
► Convert pressure transducer voltage to actual pressure or vacuum readings
► Use up to four Pressure Transducers at one time.
► Use in conjunction with other ATS diagnostic equipment.
► Free software updates!
► Free technical support!
NOTE: This kit does not include a scope!
Kit Contents
• iEA Amplifier
• iEA Spark Tester with RF Filter
• iEA Exhaust Sensor
• 14mm Compression Tester Adapter
• 18mm Compression Tester Adapter
• Pressure Transducer Cables
• Phono Jack to Phono Jack Cable
• Exhaust Tail Pipe Hose
• -30hg Vacuum Transducer
• 300psi Transducer
• 500psi Transducer
• 3/8in Hose Adapter
• 1/4in Hose Adapter
• Quick Connect Coupler
• USB Software Card
• Hard Plastic Travel Case with Foam Padding
• Pressure Wave Animations
• New Diagnostic Technologies Video
