Categories
Shop by Price
Vendors
Featured Products
Join our Newsletter
Subtotal: $0.00
Blog Tags

> Lab Scopes Accessories > Ignition > Mixmaster 12-Channel Automotive Signal Mixer

 
Connection of PicoScope to Engine via Mixmaster
Mixmaster Connectors and Controls

Mixmaster 12-Channel Automotive Signal Mixer

AES#:
pt-PP361
UPC:
2018.08.16
MSRP:
$389.00
Price:
$370.00
Your Savings:
$19.00 (4.88%)
Qty:
 
California Residents: Proposition 65 Warning
 
 
 
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)
Description

Now you can see a twelve-cylinder secondary ignition parade on your Pico Scope. Mixmaster can produce a parade display of up to twelve cylinders using a single channel of your Pico Scope. If you have a two-channel or four-channel Pico Scope the Mixmaster will also display two engine banks separately with up to six cylinders per bank.

Pico Mixmaster is battery-powered, rugged and conveniently portable. It is supplied with a set of four secondary ignition leads, three BNC leads to connect to the oscilloscope, and an engine-block ground lead. It has a trigger output to help synchronise the scope to a known cylinder, and a switch to deal with negative-going wasted-spark signals. There's no software to install, and it works with PicoScope or any other automotive oscilloscope program.

Ignition parade waveforms from a wasted spark ignition system

The MixMaster separates the power and spark onto separate channels.

Ignition parade waveforms from a wasted spark ignition system

 

MixMaster Contents
• Pico Mixmaster base unit with holster boot
• Ground Lead (14-1/2 inches long)
• 4 Secondary Pickup leads (35 inches long) *
• 3 BNC leads (4-ft long) to connect to scope module
• User Guide

* You can purchase extra sets of secondary pickup leads for use with up to 12
channels. Click here for set of 4 leads!

System Requirements
The Pico Mixmaster is designed to operate with any Pico Scope.

Specifications

Product Mixmaster 12-Channel Ignition Signal Mixer
Analog bandwidth 10 MHz
Bank A and B inputs 12 x BNC female
91 kΩ resistance
-2 V to +2 V (operating)
-4 V to +4 V (absolute maximum)
Oscilloscope outputs
Output level
3 x BNC female
-2 to +2 V
Environment limits:
Operating temperature
Operating humidity
Storage temperature
Storage humidity

0 °C to 45 °C
5% to 80% RH, non-condensing
-20 °C to +60 °C
5% to 95% RH, non-condensing
Power supply 9 volt PP3 battery
Battery life 48 hours approximately (power on, idle)
Dimensions 221 x 115 x 58 mm
(8.7 x 4.5 x 2.3 in)
including rubber case

 

Supporting our community

Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave IAP