Categories
Shop by Price
Vendors
Join our Newsletter
GO
Shopping Cart
Subtotal: $0.00

> Lab Scopes Accessories > WPS500X Maxi Transducer Kit (with carry case)

 
WPS500x connected to a vehicle
WPS500x controls
WPS500x ports
Pico WPS Kit comparison (PP939, PQ038)

WPS500X Maxi Transducer Kit (with carry case)

AES#:
pt-PQ038
UPC:
2025.01.06
 
$1,909.00
Qty:
 
California Residents: Proposition 65 Warning
 
 
 
Eligible for FREE Ground Shipping(Eligible for FREE Ground Shipping)
Description
More Info

Manufacturer backordered. Lead time of 2-5 weeks from date of purchase.

The Pico WPS500X Maxi kit allows you to purchase the WPS500X Automotive Pressure Transducer together with a full set of hoses and adapters, giving you the maximum possible flexibility available.

Designed to offer uncompromising resolution and accuracy, the Pico automotive diagnostic pressure transducer allows quick and accurate pressure analysis of many automotive systems, with:
* three pressure ranges
* a zoom tool
* integrated bleed-off / pressure relief valve

What Lab Scopes does the WPS500X Transducer work with?
The Pico WPS500X Transducer works with all modern automotive and industrial lab scopes, including, but not limited to: PicoScope, Snap-on scopes, Fluke ScopeMeters, Bosch scopes, etc... However, lab scopes with banana inputs require a banana to BNC Male adapter.

PQ038 Kit Contents
Transducer
- WPS500X (TA071)
Compression
- Standard compression hose (w/Universal Tip) (TA212)
- M10 Short Reach Adapter for Standard Compression Hose (TA213)
- M10 Deep Reach Adapter for Standard Compression Hose (TA214)
- M12 Deep Reach Adapter for Standard Compression Hose (TA216)
- M14 Short Reach Adapter for Standard Compression Hose (TA217)
- M14 Deep Reach Adapter for Standard Compression Hose (TA218)
- M16 Ford Trition Adapter for Standard Compression Hose (TA219)
- M18 Short Reach Adapter for Standard Compression Hose (TA220)
Exhaust
- Exhaust adapter for WPS500X (TA087)
Vacuum
- Vacuum tap for WPS500X (PP972)
- Vacuum hose adapter for WPS500X (TA085)
- Universal vacuum hose adapter (TA129)
Fuel
- Fuel hose pressure tap for WPS500X (Small) (PP973)
- Fuel hose pressure tap for WPS500X (Medium) (PP974)
- Fuel pressure test hose for WPS500, large Schrader valve (TA083)
- Fuel pressure test hose, small Schrader valve (TA117)
Adapters
- Bleed hose for WPS500X pressure transducer (TA086)
- Foster 2 series 1/8" coupler w/valve,male NPT (TA142)
- WPS500X Adapter Kit A (PP970)
- WPS500X Adapter Kit B (TA250)
Accessories
- Cable: insulated BNC to insulated BNC 5m (TA081)
- Charging Cable: USB A male to mini 5pin 2m (TA130)
- WPS500X pressure transducer manual (DO157)
Storage
- WPS500X carrying case (PA094)
 

WPS and PicoScope Automotive 7 beta software with Phase Rulers and Cursors...

Zoom Modes

The zoom feature operates by removing all of the voltage from the signal below 100 Hz and then magnifying the remaining signal.

Zoom 1: This mode multiplies the signal 10 times.

Zoom 2: This mode multiplies the signal 100 times. For example, let* say the transducer is connected to intake manifold vacuum on a running engine at idle with
the transducer set to mode 2 (-15 to +50 psi or -1 to +3.45 bar) and the waveform on the scope is at -9 psi (-0.6 bar). The fluctuation in the signal caused by the
valves?opening and closing compared with atmospheric pressure forcing air into the manifold will be visible but will only make up a small portion of the overall signal.
Selecting the zoom function will bring the waveform up to the zero line (remove the -9 psi portion) and the fluctuations will be magnified, making analysis of this
component of the signal much clearer.

Zoom 3: Zoom level 3 multiplies the signal by about 1,000 times. It is extremely sensitive and is suitable only for vacuum measurements.

 

 

 

Fluid Compatibility

The WPS500X is suitable for use with the following types of fluid:
- Brake, clutch and other hydraulic fluids
- Gasoline and diesel
- Air
- Water

 

 

Ranges

The Pico WPS500x features three output ranges:

 
Range 1: The first range measures from -15 psi (-1 bar) to +500 psi (34.5 bar).
It offers high resolution and accuracy for high-pressure tests such as cranking and running cylinder compression or fuel pressure testing. It is also helpful for identifying cam timing issues such as jumped timing belts and stretch timing chains, especially on multi-cam engines that may not have a cam sensor on each camshaft. The WPS500X kit includes a specially designed compression hose for performing this test with a significantly reduced error and higher operating temperature range than conventional compression hoses and adapters.

 

Range 2: The second range measures from -15 psi (-1 bar) to +50 psi (+3.45 bar).
This range is ideal for vacuum test and fuel system tests. When testing these systems the zoom function is especially useful to analyze valve operation with the vacuum waveform or the injectors through the fuel waveform.


 
 

Range 3: The third range measures -5 to +5 psi (-0.345 to +0.345 bar).
This setting is sensitive enough to analyze small pressures or pulses such as exhaust pulses from the tail pipe.
 
 

 



 

 

 

 


 

 

Supporting our community

Banner Diagnostic Network Banner Assurance iATN We are a Proud Friend of the NACAT Education Foundation ASE AESwave Ascca AESwave KivaAESwave